Mitsubishi Q00JCPU User Manual page 293

6
FUNCTIONS
(2) Monitoring the Local Devices
Monitor local devices in the following steps:
(3) Precautions
(a) Local devices that can be monitored/tested by one GX Developer
(b) Number of programs that can be monitored/tested
(c) Monitor of local devices in stand-by type program
(d) Local device monitor of fixed scan execution type program
Connect the personral computer to
the CPU module.
Display the circuit in the circuit mode.
Change the mode to the monitor mode.
Choose [Tools] [Options].
Select <Each program> tab.
Select "Monitor" to monitor
the local device.
The local device of the
displayed program is
monitored.
Diagram 6.35 Local device monitor procedure flowchart
It is only a single program that local devices can be monitored or tested by
operating from a single GX Developer. Local devices in multiple programs cannot
be monitored or tested by operating from a single GX Developer.
It is a maximum of 16 programs that local devices can be monitored or tested by
operating from multiple GX Developers connected to a RS-232 serial
communication module of the CPU module.
When the local devices in the stand-by type program are monitored, the scan time
increases since the local device data are saved and restored.
( Section 9.13.1)
Local devices in a fix scan execution type program cannot be monitored or tested.
Display option window
Change to the option
selection window by program
Setting of the local device
monitor
6.11 Monitor Function
6.11.2 Local device monitor/test
1
2
3
4
5
6
7
8
6
- 52