Mitsubishi Q00JCPU User Manual page 218

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(3) Additions/changes to standard ROM or Flash card files
5
5.2 High Performance Model QCPU, Process CPU and Redundant CPU
- 36
5.2.6 Write to standard ROM and Flash card by GX Developer
2) Using [Write to PLC (Flash ROM)] of GX Developer
• Choose [Online]
ROM)] on GX Developer.
• The Write to PLC (Flash ROM)screen appears.
• Select the target memory.
• Select the files to be written, and write them to the standard ROM or Flash
card.
Since all files stored in the standard ROM or Flash card are automatically deleted
when files are to be written to the standard ROM or Flash card, additions/changes to
the stored files cannot be made directly.
Use the following procedures.
(a) When [Write the program memory to ROM...] of GX Developer was used for
writing
• Choose [Online]
program memory.
• Make necessary additions/changes to the read files.
• Write the modified files to the program memory.
• Choose [Online]
memory to ROM...], and write the files to the standard ROM or Flash card.
(b) When [Write to PLC (Flash ROM)] of GX Developer was used for writing
• Choose [Online]
standard ROM or Flash card.
• Make necessary additions/changes to the read files.
• Choose [Online]
ROM)], and write the modified files to the standard ROM or Flash card.
[Write to PLC (Flash ROM)]
Diagram 5.26 Write to PLC (Flash ROM)screen
[Read from PLC] on GX Developer and read all files of the
[Write to PLC (Flash ROM)]
[Read from PLC] on GX Developer and read all files of the
[Write to PLC (Flash ROM)]
[Write to PLC (Flash
[Write the program
[Write to PLC (Flash