Mitsubishi Q00JCPU User Manual page 207

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(4) Write to standard ROM
There are the following 3 methods for writing data to the standard ROM.
POINT
Remark
(5) How to use the program stored in the standard ROM
Since operation cannot be executed by the program stored in the standard ROM, use
that program by booting (reading) it to the program memory. (
• Choose [Online] [Write to PLC (Flash ROM)]
ROM...] on GX Developer to batch-copy the program memory data to the
standard ROM. ( Section 5.2.6)
• Choose [Online] [Write to PLC (Flash ROM)]
GX Developer to write data to the standard ROM. (
• Use the automatic write of all data from memory card to standard ROM.
( Section 5.2.7)
The file size has the minimum unit. (
The occupied memory capacity may be greater than the actual file size.
Note that as the number of files rises, the difference between the occupied
memory capacity and actual file size increases.
Refer to the sections above for details of the selection, applications, procedures
and precautions for the standard ROM wiring methods.
5.2 High Performance Model QCPU, Process CPU and Redundant CPU
[Write the program memory to
[Write to PLC (Flash ROM)] on
Section 5.2.6)
Section 5.4.4)
Section 5.2.8)
5.2.3 Standard ROM
1
2
3
4
5
6
7
8
5
- 25