Mitsubishi Q00JCPU User Manual page 316

6
FUNCTIONS
(5) Precaution
6
6.13 Execution Time Measurement
- 75
6.13.1 Program list monitor
POINT
Depending on the instruction, the output may not turn OFF if "After stop, output
stop" is executed.
For details, refer to the section of the POFF instruction in the following manual.
QCPU (Q Mode)/QnACPU Programming Manual (Common Instructions)
The scan time of a constant scan execution type program being executed is not
displayed on screen, but a dash (-) is displayed in the Scan Time column.