Mitsubishi Q00JCPU User Manual page 635

APPENDICES
(2) System information
Number Name Meaning
Status of CPU
SD200 Status of switch
switch
TableApp.20 Special register
Explanation
• The switch status of the remote I/O module is stored in the following
format.
to
b15
Vacancy
1) Remote I/O module switch statusAlways 1: STOP
• The CPU switch status is stored in the following format:
to to
b15 b12 b11 b8 b7
3)
Vacancy
0: RUN
1): CPU switch status 1: STOP
2: L.CLR
2): Memory card
Always OFF
switch
b8 through b12 correspond to
SW1 through SW5 of system
3): DIP switch setting switch 1.
0: OFF, 1: ON.
b13 through b15 are vacant.
• The CPU switch status is stored in the following format:
b15 to b8 b7
Vacancy
1): CPU switch status 0: RUN
1: STOP
2): Memory card switch Always OFF
• The CPU switch status is stored in the following format:
to to
b15 b12 b11 b8 b7
3) Vacancy
0: RUN
1): CPU switch status
1: STOP
2: L.CLR
b4 corresponds to memory card
2): Memory card
A, and b5 corresponds to
switch
memory card B
b8 through b12 correspond to
SW1 through SW5 of system
3): DIP switch setting switch 1.
b14 and b15 correspond to SW1
and SW2 of system setting switch
2, respectively.
OFF at 0; ON at 1
Set by
(When set)
b4 b3 to b0
S (Always)
1)
to to
b4 b3 b0
2) 1)
S (Every END
processing)
to b4 b3 to b0
2) 1)
S (Every END
processing)
to to
b4 b3 b0
2) 1)
S (Every END
processing)
Appendix 2 Special Register List
Corres-
ponding
Corresponding
ACPU
CPU
D9
New Rem
Qn(H)
New QnPH
QnPRH
New Q00J/Q00/Q01
New QnA
App
- 40
9
10
11