Mitsubishi Q00JCPU User Manual page 464

9
DEVICE EXPLANATION
(4) Procedure for external outputs
9
9.2 Internal User Devices
- 13
9.2.4 Latch relay (L)
Outputs (Y) are used to output sequence program operation results to an external
destination.
POINT
1. Internal relays (M) should be used when a latch (memory backup) is not
required.(
2. For latch clear, the latch clear disabled range can be set to each device in the
device setting of the PLC parameter dialog box.(
Section 9.2.3)
Section 6.3)