Mitsubishi Q00JCPU User Manual page 298

6
FUNCTIONS
Basic
Note6.15
Input
Output
Note15
Basic
Note6.15
6
6.11 Monitor Function
- 57
6.11.3 Enforced ON/OFF of external I/O
(d) Canceling ON/OFF registration information
ON/OFF registration information can be canceled from GX Developer. Devices for
which enforced ON/OFF has been performed will assume the following statuses
when ON/OFF registered information has been cancelled.
Table6.18 Device statuses after ON/OFF registration information is canceled
Enforced ON/OFF device
Input from modules
mounted on the base unit
Input of CPU module to be
refreshed from LX of
MELSECNET/H module
Input of CPU module to be
refreshed from RX of CC-
Link
Input other than above
(outside of the refresh
range)
Output from modules
mounted on the base unit
Output of CPU module to
be refreshed from LX of
MELSECNET/H module
Output of CPU module to
be refreshed from RX of
CC-Link
Output other than above
(outside of the refresh
range)
The enforced ON/OFF settings are cleared with the following operations.
• Power supply OFF
• Reset with the CPU module RESET/L. CLR switch
• Reset with remote reset operations
The enforced ON registration and enforced OFF registration cannot be executed for
Basic model QCPU by selecting [Online]
registration/cancellation] (
model QCPU by conducting device test with GX Developer.
Note6.15
ON/OFF performed with
sequence programs
Assumes the ON/OFF status received from the module.
Assumes the refreshed ON/OFF status from MELSECNET/H.
Assumes the refreshed ON/OFF status from CC-Link.
Maintains the enforced ON/OFF status.
Outputs the results of the
sequence program operations.
Outputs the results of the
sequence program operations.
Outputs the results of the
sequence program operations.
Assumes the result of the
sequence program operations.
ON
[Debug]
(3) in this section). This operation can be executed for Basic
Note15
ON/OFF not performed with
sequence programs
OFF is output.
OFF is output.
OFF is output.
Assumes the OFF status.
[Forced input output