Mitsubishi Q00JCPU User Manual page 291

6
FUNCTIONS
6.11.2 Local device
Basic
Note6.10
Local devices specified at the Device tab screen in the (PLC) Parameter dialog box can be
monitored or tested by operating from GX Developer. This function is useful when
debugging a program and monitoring local devices in a program monitored by GX
Developer. (
(1) Monitoring the Local Devices
Note10
The Basic model QCPU is irrelevant to the difference between global devices and local
Basic
devices (
the local devices on GX Developer.
Note6.10
monitor/testNote10
Section 9.13.1 )
Table6.16 shows the status of three programs "A", "B", and "C" being executed on the
CPU module, with local devices D0 to 99 specified. It assumes that these three
programs are executed in the order of A
Table6.16 Data displayed when three programs are executed
Setting
When local devices are
D0 in Program "C" is monitored.
specified
When local devices are D0 in the displayed program is
not specified monitored.
Section 9.13.1 ).
B C (END processing)
Monitor Device
D0 (Local device)
Therefore, it is not necessary to make the monitor setting of
6.11 Monitor Function
6.11.2 Local device monitor/test
A B ....
D100 (Global device)
D100 is monitored after Program
"C" is executed.
D100 is monitored after the
displayed program is executed.
6
1
2
3
4
5
6
7
8
- 50