Mitsubishi Q00JCPU User Manual page 212

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(3) Before using the SRAM or ATA card
Remark
5
5.2 High Performance Model QCPU, Process CPU and Redundant CPU
- 30
5.2.5 Memory card
Before using the SRAM or ATA card, be sure to format it by GX Developer.
(a) Formatting
To format the program memory, choose [Online]
Developer.
When formatting the SRAM card, select "Memory card (RAM)" as the target
memory.
When formatting the ATA card, select "Memory card (ROM)" as the target
memory.
POINT
1. Use only GX Developer to format the ATA card.
If formatted by the formatting function of Microsoft
not be used with the CPU module.
2. When the SRAM or ATA card is formatted, the memory card information area
is automatically secured. Therefore, the memory capacity is reduced by that
amount.
The memory capacity can be checked from the Read from PLC screen of GX
Developer. (
The Flash card need not be formatted.
Diagram 5.21 SRAM or ATA card formatting
(3)(b)in this section)
[Format PLC memory] on GX
R R
Windows , the card may