Mitsubishi Q00JCPU User Manual page 295

6
FUNCTIONS
(1) Operation performed at enforced ON/OFF
Basic
Note6.12
Redundant
Note6.13
Note12
The enforced ON registration and enforced OFF registration cannot be executed for Basic model
Basic
QCPU by selecting [Online]
Note6.12
(
conducting device test with GX Developer.
Note13
Redundant
In the backup mode, the enforced ON/OFF cannot be executed for the output (Y) of the standby
system.
Note6.13
It is possible to perform enforced ON (Set forced ON) enforced OFF (Set forced OFF)
and cancel enforced ON/OFF (Cancel it) with the enforced ON/OFF
Note6.12
function. Note12
The operations for performing enforced ON, enforced OFF and canceling enforced
ON/OFF are shown in Table6.17.
Table6.17 Operation performed at enforced ON/OFF cancellation
Operation
During canceling Performs sequence program
(no operations) operations with external input.
Performs sequence program
During enforced
operations in the enforced ON
ON
status.
Performs sequence program
During enforced
operations in the enforced OFF
OFF
status.
[Debug]
(3) in this section).
This operation can be executed for Basic model QCPU by
Note13
Input (X) operation
[Forced input output registration/cancellation]
6.11 Monitor Function
6.11.3 Enforced ON/OFF of external I/O
Output (Y) operation
Outputs the results of sequence
program operations
Note6.13
externally.
Outputs "ON" externally regardless
of the results of sequence program
Note6.13
operations.
Outputs "OFF" externally
regardless of the results of
sequence program
Note6.13
operations.
6
1
2
3
4
5
6
7
8
- 54