Mitsubishi Q00JCPU User Manual page 569

10
CPU MODULE PROCESSING TIME
Q02CPU
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU,
Q12PHCPU, Q25PHCPU, Q12PRHCPU,
Q25PRHCPU
Q02CPU
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU,
Q12PHCPU, Q25PHCPU, Q12PRHCPU,
Q25PRHCPU
(8) Low speed program operation time
Basic Redundant
Note10.6
(9) Common processing time
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU,
Q12PHCPU, Q25PHCPU
Q12PRHCPU, Q25PRHCPU
Note6
Since the Basic model QCPU and Redundant CPU cannot use low speed execution type
Basic Redundant
programs, it is not necessary to be conscious of the low speed execution type program operation
time.
Note10.6
(b) High Performance model QCPU, Process CPU, Redundant CPU
• Monitor by GX Developer
This indicates the processing time required to execute monitor by GX
Developer.
Table10.13 When 32 points of data registers have been set in device registration monitor
CPU module
Table10.14 When monitor condition has been set
CPU module
The low speed program operation time is the sum of processing times of the
instructions used in the low speed execution type program to be executed by the CPU
module.
The processing times are the same as those in (4) of this section.
This indicates the processing time common to the CPU modules.
Table10.15 shows the common processing time for each CPU module model.
Table10.15 Common processing time
CPU module
10.1.2 Time required for each processing included in scan time
Processing time
0.017ms
0.011ms
Processing time
Specified device
Specified step match
0.05ms
0.03ms
Note10.6
Note6
Common processing time
0.66ms
0.60ms
0.52ms
0.38ms
0.15ms
0.5ms
10.1 Scan Time
9
10
11
match
0.01ms
0.01ms
10
- 11