Mitsubishi Q00JCPU User Manual page 112

3
SEQUENCE PROGRAM CONFIGURATION AND
EXECUTION CONDITIONS
Remark
3
3.3 Settings for Creation and Execution of Multiple Sequence Programs
- 47
3.3.5 Fixed scan execution type program
Refer to the following manual for the block guarantee of cyclic data per station.
Q Corresponding MELSECNET/H Network System Reference Manual
Interrupt factor
Fixed scan
execution type
program execution
Link refresh
execution
Diagram 3.44 Fixed scan execution type program execution during network refresh
(d) Execution during END processing
When the execution condition for the fixed scan execution type program is
satisfied during constant scan execution or during END instruction waiting time,
the fixed scan execution type program is executed.
Constant scan
Fixed scan interval
END processing
Scan execution type
program
Fixed scan execution
type program
Diagram 3.45 Fixed scan execution type program execution during waiting time
10ms 10ms
Condition
enabled
1:
Wait time
2:
If processing is not completed during
wait time, scan time increases.
10ms 10ms
Link refresh is suspended and fixed
scan execution type program is
executed.
2
1