6
FUNCTIONS
• At the "PLC file" tab screen in the "(PLC) Parameter" dialog box, designate the
name of the file where the device initial value data is to be stored.
1) For Basic model QCPU
Set Device initial values to "Use" in the PLC file setting of the PLC parameter
dialog box.
2) For High Performance model QCPU, Process CPU, Redundant CPU
Set the file name that stores the used device initial value data in the PLC file
setting of the PLC parameter dialog box.
Diagram 6.93 PLC file screen (for High Performance model QCPU)
• Write the device initial value data and parameter settings to the CPU module.
6.26 Device Initial Value
1
2
3
4
5
6
7
8
6
- 162