Mitsubishi Q00JCPU User Manual page 399

6
FUNCTIONS
(2) (Program example)
The following program example reads the module service interval of the intelligent
function module at X/Y160 (Diagram 6.89).
Read
start signal
POINT
Diagram 6.89 Module service interval reading program example
1. The access interval in cyclic communication from the network module is not
stored.
2. To read the service interval time when access is made from GX Developer of
the other station on the network, set the I/O number of the network module.
6.25 Reading the Module Service Interval Time
Sets I/O number 160 (hexadecimal) to SD550.
Starts module service interval time read.
Stores module service interval time into D551, D552.
1
2
3
4
5
6
7
8
6
- 158