Mitsubishi Q00JCPU User Manual page 608

APPENDICES
Number Name
Trace completed
SM805
Sampling trace
completed
Status latch
SM806
preparation
SM807 Status latch command
Status latch
SM808
completion
SM809 Status latch clear
Program trace
SM810
preparation
SM811 Start program trace
Program trace
SM812
execution under way
SM813 Program trace trigger
After program trace
SM814
trigger
Program trace
SM815
completion
SM820 Step trace preparation
SM821 Step trace starts
Step trace execution
SM822
underway
SM823 After step trace trigger
SM824 After Step trace trigger
SM825 Step tracecompleted
Trace error
SM826
Sampling trace error
SM827 Status latch error
SM828 Program trace error
Number Name
SM900 Power cut file
SM910 RKEY registration flag
App
Appendix 1 Special Relay List
- 13
Meaning
• Switches ON at completion of trace
OFF : Not completed
ON : End
• Goes ON at completion of sampling trace
OFF : Not ready
• Goes ON when status latch is ready
ON : Ready
• Runs status latch command
OFF ON: Latch
OFF : Latch not completed
• Comes ON when status latch is completed.
ON : Latch completed
• Enable next status latch
OFF ON: Clear
OFF : Not ready
• Goes ON when program trace is ready
ON : Ready
OFF : Suspend • Program trace started when this goes ON
ON : Start • Suspended when OFF (Related special M all OFF)
OFF : Suspend
• ON when program trace execution is underway
ON : Start
• Program trace trigger goes ON when this goes from
OFF to ON (Identical to PTRA instruction execution
OFF ON: Start
status)
OFF : Not after trigger
• Goes ON after program trace trigger
ON : After trigger
OFF : Not completed
• Goes ON at completion of program trace
ON : End
OFF : Not ready
• Goes ON after program trace registration, at ready
ON : Ready
• Select whether execution of step trace is started or
OFF : Suspend suspended.
ON : Start • When this goes ON, step trace is started
• Suspended when OFF (Related special M all OFF)
OFF : Suspend • Goes ON when step trace execution is underway
ON : Start • Goes OFF at completion or suspension
• Goes ON if even 1 block within the step trace being
OFF : Not after trigger
executed is triggered.
ON : Is after first trigger
• Goes OFF when step trace is commenced.
• Goes ON if all blocks within the step trace being
OFF : Is not after all triggers
executed are triggered.
ON : Is after all triggers
• Goes OFF when step trace is commenced.
OFF : Not completed • Goes ON at step trace completion.
ON : End • Goes OFF when step trace is commenced.
• Switches ON if error occurs during execution of trace
OFF : Normal
ON : Errors
• Goes ON if error occurs during execution of sampling
trace.
OFF : Normal • Goes ON if error occurs during execution of status
ON : Errors latch.
OFF : Normal • Goes ON if error occurs during execution of program
ON : Errors trace.
(9) Latch area
Meaning
OFF : No power cut file • Goes ON if a file is present during access when
ON : Power cut file present power is interrupted.
OFF : Keyboard input
notregistered • Goes ON at registration of keyboard input.
ON : Keyboard input • OFF if keyboard input is not registered.
registered
TableApp.9 Special relay
Explanation
TableApp.10 Special relay
Explanation
Corres-
ponding
Set by
Corresponding CPU
ACPU
(When Set)
M9
S (Status change) M9043
S (Status change) M9043
S (Status change) New
U New
S (Status change) M9055
U New
S (Status change) New
S (Status change) New
U New
S (Status change) New
S (Status change) New
S (Status change) New
S (Status change) New
M9182form
U
at change
S (Status change) M9181
S (Status change) New
S (Status change) New
S (Status change) M9180
S (Status change) New
S (Status change) New
S (Status change) New
S (Status change) New
Corres-
ponding
Set by
Corresponding CPU
ACPU
(When Set)
M9
S (Status
New
change)/U
S (Instruction
New
execution)
Qn(H)
QnPH
QnPRH
QnA
QnA
QnPH
QnPRH
Qn(H)
QnPH
QnPRH
QnA
QnA