Mitsubishi Q00JCPU User Manual page 174

4
I/O NUMBER ASSIGNMENT
Basic Process Redundant
Note4.8 Note4.8 Note4.8
Note8
Basic Process Redundant
Note4.8 Note4.8 Note4.8
4
4.7 I/O Assignment by GX Developer
- 26
4.7.2 Concept of I/O assignment using GX Developer
(b) Type (For CPU module)
Select the type of module being mounted from the followings:
• Empty (Empty slot)
• Input (Input module)
• Hi Input (Q Series high speed module)
• Output (Output module)
• I/O Mix (I/O mixed module)
• Intelligent (Intelligent function module or AnS corresponding special function
Note4.8
module)
• Interrupt (Q Series interruption module)
If the type is not designated, the type of the actually mounted module is used.
* 1 : "Hi input" can be set using GX Developer Version 5 (products after SW5D5C-GPPW-E)
* 2 : "Interrupt" can be set using GX Developer Version 6 (products after SW6D5C-GPPW-E)
(c) Model name
Set the mounted module model name within 16 characters.
The specified model name is not used for the CPU module. (It is used as a user's
memo.)
(d) Points (Used with CPU module)
To change the number of occupied I/O points of each slot, select it from the
followings:
• 0(0 point)
• 48(48 points)
• 256(256 points)
If the number of occupied I/O points is not designated for a slot, the one of the
actually mounted module is used.
* 1 : Not available for the Q00JCPU.
(Because the I/O points of the Q00JCPU are 256.)
(e) Start XY (Used with CPU module)
When the I/O number of each slot is changed, you should designate the head I/O
number according to the change.
If Start XY is not designated for a slot, the I/O number continuing from the last
number of the currently designated slot is assigned.
For the Basic model QCPU, Process CPU and Redundant CPU, the AnS compatible special
function modules are not available.
Note8
• 16(16 points)
• 64(64 points)
*1
• 512(512 points)
*1
*2
• 32(32 points)
• 128(128 points)
• 1024(1024 points)
*1