Mitsubishi Q00JCPU User Manual page 205

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(4) Write to program memory
To write data to the program memory, choose [Online]
Developer.
Select "Program memory/Device memory" as the target memory on the Write to PLC
screen and write data to the PLC.
POINT
Diagram 5.16 Write to PLC screen
The file size has the minimum unit. (
The occupied memory capacity may be greater than the actual file size.
Note that as the number of files rises, the difference between the occupied
memory capacity and actual file size increases.
5.2 High Performance Model QCPU, Process CPU and Redundant CPU
[Write to PLC] on GX
Section 5.4.4)
5.2.2 Program memory
1
2
3
4
5
6
7
8
5
- 23