U
G
( S
)
S E R
U I D E
C A N
Installing the Network Scanner Utility
Required Environment
Target Operating System
Client Workstation
Network
Target Application
Software
3 – 3 0
Network Scanner Utility allows you to access stored data in the
mailbox from a client. This section describes the installation and
uninstallation of the Network Scanner Utility using the Driver/
Network Utility CD.
To install Network Scanner Utility, a client must meet the following
requirements:
•
Microsoft Windows 95/98/ME
•
Microsoft Windows NT version 4.0/2000/XP
NOTE:
Windows NT Server TSE (Terminal Server Edition) and
Windows 2000 Server/Advanced Server Terminal Service are not
compatible with this feature.
•
i486DX4/100 MHz processor or above (Pentium 100 MHz or
above is recommended.
•
32 MB memory.
•
40 MB or more of free hard disk space (not including space for
scanned data).
A client must be connected to a network and be able to
communicate with the TCP/IP protocol.
To import the data stored in the mailbox to application software,
the software must be compatible with the TWAIN interface.