REP 11.4.2 Tray 2 Retard Roll
Parts List on PL 11.4
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1.
Remove Tray 2 (REP 11.1.1).
2.
Remove the Tray 2 Feeder (Figure 1).
1 Remove the Tapping Screws (4).
2 Remove the Tray 2 Feeder.
Initial Issue
WorkCentre 5020
WARNING
Figure 1
3.
Remove the Tray 2 Retard Roll Housing (Figure 2).
1 Release the hooks (2).
2 Remove the Tray 2 Retard Roll Housing from the tabs (2).
July, 2007
4-87
Figure 2
Repairs and Adjustments
REP 11.4.2