Registering Products-Mandatory For Validating Slas - Juniper EX2200 Hardware Manual

Related
Documentation
Registering Products—Mandatory for Validating SLAs
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
NOTE: You must provide mounting screws that are appropriate for your rack
or cabinet to mount the chassis on a rack or a cabinet.
Unpacking an EX2200 Switch on page 113
EX2200 Switches Hardware Overview on page 3
Register all new Juniper Networks hardware products and changes to an existing installed
product on the Juniper Networks website. Registration is mandatory for activating your
hardware service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website
and update the installation base data if there is any addition or change to
the installation base or if the installation base is moved. Juniper Networks
will not be held accountable for not meeting the hardware replacement SLAs
for products that do not have registered serial numbers or accurate installation
base data.
Register your products at:
Update your installation base at: If you have a Juniper J-Care service contract, register
any addition, change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/
can result in significant delays if you need replacement parts. This note does not apply
if you replace existing components with the same type of component.
Contacting Customer Support to Obtain Return Material Authorization for Switches
on page 189
Contacting Customer Support to Obtain a Return Materials Authorization for an NFX250
Device
https://tools.juniper.net/svcreg/SRegSerialNum.jsp
Chapter 10: Unpacking the Switch
.
. Failure to do so
115