Table 21: Chassis Viewer For Ex3400 And Ex4300 Switches - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide
Table 20: Chassis Viewer for EX3200, EX3300, and EX4200 Switches (continued)
Field
Virtual Chassis port
USB port
Management ( ) port
me0
Console port
Power supplies

Table 21: Chassis Viewer for EX3400 and EX4300 Switches

Field Description
Front View
Interface status In the image, the colors listed below denote the interface status for both copper and fiber media
type of ports:
Mouse over the interface (port) to view more information.
LCD panel LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current character
display.
NOTE:
Mini- USB console port Indicates the mini-USB port for the switch. This is used to connect the switch to a management
console such as a laptop or a PC. (You might do this for initial switch configuration.)
NOTE:
EX Series switch.
36
Description
Displayed only when EX4200 switches are configured as a Virtual Chassis. The following colors
denote the VCP status:
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for your
EX Series switch.
The management port is used to connect the switch to a management device for out-of-band
management.
The console port is used to connect the switch to a management host such as a PC or a laptop.
(You might do this for initial switch configuration.)
Mouse over the power supply icons to display name, status, and description information.
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
There is no LCD panel on EX3400 switches.
We recommend that you use USB flash drives purchased from Juniper Networks for your
Copyright © 2016, Juniper Networks, Inc.