Maintenance And Operational Safety Warnings; Maintenance And Operational Safety Guidelines And Warnings; Battery Handling Warning - Juniper EX2200 Hardware Manual

CHAPTER 23
Maintenance and Operational Safety
Warnings

Maintenance and Operational Safety Guidelines and Warnings

Battery Handling Warning

Copyright © 2016, Juniper Networks, Inc.
Maintenance and Operational Safety Guidelines and Warnings on page 237
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
This topic also applies to hardware devices in the QFX Series, to OCX1100 switches, and
to NFX250 devices.
While performing the maintenance activities for devices, observe the following guidelines
and warnings:
Battery Handling Warning on page 237
Jewelry Removal Warning on page 238
Lightning Activity Warning on page 240
Operating Temperature Warning on page 240
Product Disposal Warning on page 241
WARNING: Replacing a battery incorrectly might result in an explosion.
Replace a battery only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
Waarschuwing Er is ontploffingsgevaar als de batterij verkeerd vervangen
wordt. Vervang de batterij slechts met hetzelfde of een equivalent type dat
door de fabrikant aanbevolen is. Gebruikte batterijen dienen overeenkomstig
fabrieksvoorschriften weggeworpen te worden.
237