Connecting Earth Ground To An Ex Series Switch; Figure 45: Connecting A Grounding Cable To An Ex Series Switch - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide

Connecting Earth Ground to an EX Series Switch

Related
Documentation
148
To connect earth ground to a switch:
Connect one end of the grounding cable to a proper earth ground, such as the rack in
1.
which the switch is mounted.
Place the grounding lug attached to the grounding cable over the protective earthing
2.
terminal. See Figure 45 on page

Figure 45: Connecting a Grounding Cable to an EX Series Switch

Secure the grounding lug to the protective earthing terminal with the washers and
3.
screws.
Dress the grounding cable and ensure that it does not touch or block access to other
4.
switch components.
WARNING: Ensure that the cable does not drape where people could trip
over it.
Connecting AC Power to an EX2200 Switch on page 149
Connecting DC Power to an EX2200 Switch on page 151
Connecting AC Power to an EX2300 Switch
Connecting AC Power to an EX3200 Switch
Connecting DC Power to an EX3200 Switch
Connecting AC Power to an EX3300 Switch
Connecting DC Power to an EX3300 Switch
Connecting AC Power to an EX3400 Switch
Connecting AC Power to an EX4200 Switch
Connecting DC Power to an EX4200 Switch
Connecting AC Power to an EX4300 Switch
Connecting DC Power to an EX4300 Switch
148.
Copyright © 2016, Juniper Networks, Inc.