Figure 3: Front Panel Of An Ex2200-C Switch With 12 Gigabit Ethernet Ports; Figure 4: Front Panel Of An Ex2200-C Switch With 12 Gigabit Ethernet Ports; System Overview - Juniper EX2200 Hardware Manual

Copyright © 2016, Juniper Networks, Inc.
The front panel of an EX2200-C switch consists of the following components:
Network ports—depending on the switch model, either of:
12 10/100/1000BASE-T Ethernet ports, (PoE+) in EX2200-C-12P
12 10/100/1000BASE-T Ethernet ports, (non-PoE) in EX2200-C-12T
2 built-in dual-purpose uplink ports, each of which includes one 10/100/1000 RJ-45
Ethernet port and one SFP port
1 USB port
1 Mini-USB console port
1 RJ-45 console port
1 Management Ethernet port
2 chassis status LEDs
4 port status mode LEDs in PoE+ and 3 port status mode LEDs in non-PoE
Factory reset/Mode button
Figure 3 on page 7 shows the front panel of an EX2200-C switch with 12 Gigabit Ethernet
PoE+ ports and Figure 4 on page 7
12 Gigabit Ethernet non-PoE ports.
Figure 3: Front Panel of an EX2200-C Switch with 12 Gigabit Ethernet
Ports (PoE+)
Figure 4: Front Panel of an EX2200-C Switch with 12 Gigabit Ethernet
Ports (non-PoE)
shows the front panel of an EX2200-C switch with
Chapter 1: System Overview
7