Juniper EX2200 Hardware Manual page 270

EX2200 and EX2200-C Switches Hardware Guide
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
Related
Documentation
248
You must provide an external certified circuit breaker rated minimum 20 A in the building
installation.
The power cord serves as the main disconnecting device for the AC-powered device.
The socket outlet must be near the AC-powered device and be easily accessible.
For devices that have more than one power supply connection, you must ensure that
all power connections are fully disconnected so that power to the device is completely
removed to prevent electric shock. To disconnect power, unplug all power cords (one
for each power supply).
General Safety Guidelines and Warnings on page 211
General Electrical Safety Guidelines and Warnings on page 243
Multiple Power Supplies Disconnection Warning on page 259
Connecting AC Power to an EX2200 Switch on page 149
Connecting AC Power to an EX3200 Switch
Connecting AC Power to an EX3300 Switch
Connecting AC Power to an EX4200 Switch
Connecting AC Power to an EX4300 Switch
Connecting AC Power to an EX4500 Switch
Connecting AC Power to an EX4550 Switch
Connecting AC Power to an EX4600 Switch
Connecting AC Power to an EX6200 Switch
Connecting AC Power to an EX8200 Switch
Connecting AC Power to an EX9204 Switch
Connecting AC Power to an EX9208 Switch
Connecting AC Power to an EX9214 Switch
Connecting AC Power to an XRE200 External Routing Engine
Connecting AC Power to an OCX1100 Switch
Copyright © 2016, Juniper Networks, Inc.