Juniper EX2200 Hardware Manual page 92

EX2200 and EX2200-C Switches Hardware Guide
70
NOTE: EX2200-C switches ensure normal operation in the temperature range
30° F (0° C) through 104° F (40° C) at altitudes up to 5,000 ft (1,524 m).
In the following conditions, use extended temperature range SFP transceivers
when fiber uplinks are used:
In the temperature range 104° F (40° C) through 113° F (45° C) at altitudes
up to 5,000 ft (1,524 m)
In the temperature range 95° F (35° C) through 113° F (45° C) at altitudes
above 5,000 ft (1,524 m) up to 10,000 ft (3,048 m)
The tables in this topic describe the optical interface support over single-mode fiber-optic
(SMF) and multimode fiber-optic (MMF) cables and over the copper interface for SFP
transceivers:
Table 38 on page 71—Optical interface support and copper interface support for Gigabit
Ethernet SFP transceivers in EX2200 switches except EX2200-C switches.
Table 39 on page 90—Optical interface support for Fast Ethernet SFP transceivers
except EX2200-C switches.
Table 40 on page 96—Optical interface support and copper interface support for SFP
transceivers in EX2200-C switches.
Copyright © 2016, Juniper Networks, Inc.