Mounting An Ex2200 Switch In A Recessed Position In A Rack Or Cabinet; Mounting An Ex2200 Switch On A Wall; Mounting An Ex2200 Switch Except The Ex2200-C Model On A Wall - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide

Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet

Related
Documentation

Mounting an EX2200 Switch on a Wall

Mounting an EX2200 Switch Except the EX2200-C Model on a Wall

128
Connecting AC Power to an EX2200 Switch on page 149
Connecting DC Power to an EX2200 Switch on page 151
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 167
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 170
Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet on page 128
Rack-Mounting and Cabinet-Mounting Warnings on page 224
You can mount an EX2200 switch except the EX2200-C switch model in a rack or cabinet
such that the switch is recessed inside the rack from the rack front by 2 inches. You can
use the 2-in.-recess front brackets provided in the separately orderable four-post
rack-mount kit to mount the switch in a recessed position.
Reasons that you might want to mount the switch in a recessed position include:
You are mounting the switch in a cabinet and the cabinet doors will not close completely
unless the switch is recessed.
The switch you are mounting has transceivers installed in the uplink ports—the
transceivers in the uplink ports protrude from the front of the switch.
To mount the switch in a recessed position on four posts, follow the instructions in
"Mounting an EX2200 Switch on Four Posts of a Rack or Cabinet" on page
the switch in a recessed position on two posts, follow the instructions in
EX2200 Switch on Two Posts of a Rack or Cabinet" on page
Connecting Earth Ground to an EX Series Switch on page 143
Rack-Mounting and Cabinet-Mounting Warnings on page 224
This topic describes the process of mounting an EX2200 switch on a wall.
1. Mounting an EX2200 Switch Except the EX2200-C Model on a Wall on page 128
Mounting an EX2200-C Switch on a Wall on page 131
2.
You can mount an EX2200 switch on a wall by using the separately orderable wall-mount
kit.
WARNING:
124. To mount
"Mounting an
122.
Copyright © 2016, Juniper Networks, Inc.