Ac Power Disconnection Warning - Juniper EX2200 Hardware Manual

AC Power Disconnection Warning

Copyright © 2016, Juniper Networks, Inc.
Connecting AC Power to a QFX3100 Director Device
Connecting AC Power to a QFX3008-I Interconnect Device with Single-Phase Wiring
Trays
Connecting AC Power to a QFX3008-I Interconnect Device with Three-Phase Delta Wiring
Trays
Connecting AC Power to a QFX3008-I Interconnect Device with Three-Phase Wye Wiring
Trays
Connecting AC Power to a QFX3500, QFX3600, or QFX3600-I Device
Connecting AC Power to a QFX5100 Device
Connecting AC Power to a QFX5200
Connecting AC Power to a QFX10002
Connecting AC Power to a QFX10000
Connecting AC Power to an NFX250 Device
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
This topic also applies to hardware devices in the QFX Series, to OCX1100 switches, and
to NFX250 devices.
WARNING: Before working on the switch or near power supplies, unplug all
the power cords from an AC switch.
Waarschuwing Voordat u aan een frame of in de nabijheid van voedingen
werkt, dient u bij wisselstroom toestellen de stekker van het netsnoer uit het
stopcontact te halen.
Varoitus Kytke irti vaihtovirtalaitteiden virtajohto, ennen kuin teet mitään
asennuspohjalle tai työskentelet virtalähteiden läheisyydessä.
Attention Avant de travailler sur un châssis ou à proximité d'une alimentation
électrique, débrancher le cordon d'alimentation des unités en courant
alternatif.
Warnung Bevor Sie an einem Chassis oder in der Nähe von Netzgeräten
arbeiten, ziehen Sie bei Wechselstromeinheiten das Netzkabel ab bzw.
Avvertenza Prima di lavorare su un telaio o intorno ad alimentatori, scollegare
il cavo di alimentazione sulle unità CA.
Chapter 24: Electrical Safety Guidelines and Warnings
249