Connecting An Ex2200 Switch To A Management Console Using Mini-Usb Type-B Console Port; Figure 53: Connecting A Switch Directly To A Management Console - Juniper EX2200 Hardware Manual

Hide thumbs Also See for EX2200:
Table of Contents

Advertisement

Related
Documentation
Connecting an EX2200 Switch to a Management Console Using Mini-USB Type-B
Console Port
Copyright © 2016, Juniper Networks, Inc.

Figure 53: Connecting a Switch Directly to a Management Console

Configuring the Console Port Type (CLI Procedure)
Connecting a Switch to a Network for Out-of-Band Management on page 155
Console Port Connector Pinout Information for an EX Series Switch on page 105
Cables Connecting the EX6200 Switch to Management Devices
Cables Connecting the EX8200 Switch to Management Devices
Console Port Connector Pinout Information for an OCX1100 Switch
You can configure and manage EX2200–C switches by using the RJ-45 console port or
the Mini-USB Type-B console port. However, the console input will be active only on one
port at a time, that is, only one port will be set active at a time.
If your laptop or PC does not have a DB-9 male connector pin or RJ-45 connector pin,
you can connect your laptop or PC directly to an EX2200–C switch using a mini-USB
cable that has a Standard-A USB connector on one end and a Mini-USB Type-B (5 pin)
connector on the other end.
This section describes the process of connecting an EX2200–C switch to the management
console using the Mini-USB Type-B console port.
For information about configuring and managing an EX2200–C switch using the RJ-45
console port, see
"Connecting a Switch to a Management Console by Using an RJ-45
Connector" on page
157.
Before you begin connecting an EX2200–C switch using Mini-USB Type-B console port:
Ensure that the USB to Serial driver is installed on the host machine. You can download
the driver from
https://webdownload.juniper.net/swdl/dl/secure/site/1/record/5029.html
.
Ensure that the hyper terminal properties of the console server or laptop are set as
follows:
Baud rate—9600
Flow control—None
Data—8
Parity—None
Chapter 13: Connecting the Switch to the Network
159

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex2200-c

Table of Contents