Network Port And Uplink Port Leds In Ex2200 Switches; Figure 11: Leds On The Network Port; Figure 12: Leds On The Uplink Ports And Port Status Mode Leds In An Ex2200 Switch Except The Ex2200-C Switch Model; Table 8: Status Led On The Management Port On Ex2200 Switches - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide

Table 8: Status LED on the Management Port on EX2200 Switches

LED
Status
Related
Documentation

Network Port and Uplink Port LEDs in EX2200 Switches

16
Table 8 on page 16 describes the Status LED.
Color
Green
Connecting a Switch to a Network for Out-of-Band Management on page 155
Each network port and uplink port on the front panel of an EX2200 switch has two LEDs
that indicate link/activity and port status. Each dual-purpose uplink port in an EX2200-C
switch has two pairs of LEDs that indicate the link/activity status, one pair for each of
the two ports that constitute the dual-purpose uplink port. See
Figure 12 on page 16, and Figure 13 on page

Figure 11: LEDs on the Network Port

Link/ Status
Activity
Figure 12: LEDs on the Uplink Ports and Port Status Mode LEDs in an
EX2200 Switch Except the EX2200-C Switch Model
State and Description
Indicates the speed. The speed indicators are:
One blink per second—10 Mbps
Two blinks per second—100 Mbps
17.
Copyright © 2016, Juniper Networks, Inc.
Figure 11 on page 16,