Pluggable Transceivers Supported On Ex Series Switches - Juniper EX2200 Hardware Manual

Table 40: Optical Interface Support and Copper Interface Support for SFP Transceivers in
EX2200-C Switches (continued)
Ethernet Standard Specification
1000BASE-LH (or Model number
1000BASE-ZX)
Rate
Connector type
Fiber count
Transmitter wavelength
Minimum launch power
Maximum launch power
Minimum receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Modal bandwidth
Distance
Software required
Support for Virtual Chassis
configuration
Related
Documentation

Pluggable Transceivers Supported on EX Series Switches

Copyright © 2016, Juniper Networks, Inc.
EX2200 Switches Hardware Overview on page 3
Installing a Transceiver in a Switch on page 177
Removing a Transceiver from a Switch on page 179
The transceivers for EX Series switches are hot-removable and hot-insertable
field-replaceable units (FRUs): You can remove and replace them without powering off
the switch or disrupting switch functions.
Chapter 8: Transceiver and Cable Specifications
Value
EX-SFP-1GE-LH
1000 Mbps
LC
Dual
1550 nm
–2 dBm
5 dBm
–25 dBm
–3 dBm
SMF
9/125 µm
–
70 km (43.5 miles)
Junos OS for EX Series switches, Release 11.3 or later
Yes
101