For Ex2200 Switches" On Page; Maintenance, And Secure It To The Building Structure; Read "General Safety Guidelines And Warnings" On Page; 211, With Particular Attention - Juniper EX2200 Hardware Manual

Copyright © 2016, Juniper Networks, Inc.
WARNING: When mounting an EX2200-C switch chassis in a vertical position,
orient the front panel of the chassis downward to ensure proper airflow and
meet safety requirements in the event of a fire.
NOTE: Do not block the vents on the top of the EX2200-C switches. Doing
this can lead to overheating of the switch chassis.
Before mounting the switch using magnet mount:
Ensure that no rubber feet are installed on the bottom of the switch.
Verify that the site meets the requirements described in

for EX2200 Switches" on page

Place the desk in its permanent location, allowing adequate clearance for airflow and

maintenance, and secure it to the building structure.

Read "General Safety Guidelines and Warnings" on page
to "Chassis Lifting Guidelines for EX2200 Switches" on page
Remove the switch from the shipping carton (see
page 113).
Ensure that you have the following parts and tools available:
Magnet sheet (separately orderable)
Flat surface made of ferrous material
1 cable guard with 3 number-8 Phillips truss-head screws to secure the cable guard to
the EX2200-C switch (optional and separately orderable)
1 standard cable lock (optional and separately orderable) to secure the switch from
theft by connecting the cable to the security slots on the switch
Mount the switch under a ferrous surface using magnet mount:
1.
Turn the chassis upside down.
a.
Place the magnet sheet on the bottom of the chassis.
b.
NOTE: You can place the magnet sheet only at the bottom of the
switch.
Mount the magnet sheet along with the switch under the surface where you want
c.
to mount the switch.
Mount the switch vertically on a ferrous surface using magnet mount:
2.
Place the magnet sheet at the bottom of the chassis.
a.
"Site Preparation Checklist
47.

211, with particular attention

"Unpacking an EX2200 Switch" on
Chapter 11: Installing the Switch
221.
139