Mounting An Ex2200 Switch On Four Posts Of A Rack Or Cabinet; Figure 25: Mounting The Switch On Two Posts Of A Rack - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide
Related
Documentation

Mounting an EX2200 Switch on Four Posts of a Rack or Cabinet

124

Figure 25: Mounting the Switch on Two Posts of a Rack

Mounting rack
Have a second person secure the switch to the rack by using the appropriate screws.
8.
Tighten the screws.
Ensure that the switch chassis is level by verifying that all screws on one side of the
9.
rack are aligned with the screws on the other side.
Mounting an EX2200 Switch on Four Posts of a Rack or Cabinet on page 124
Connecting Earth Ground to an EX Series Switch on page 143
Connecting AC Power to an EX2200 Switch on page 149
Connecting DC Power to an EX2200 Switch on page 151
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 167
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 170
Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet on page 128
Rack-Mounting and Cabinet-Mounting Warnings on page 224
You can mount an EX2200 switch except an EX2200-C switch model on four posts of
a 19-in. rack or cabinet by using the separately orderable four-post rack-mount kit. (The
remainder of this topic uses "rack" to mean "rack or cabinet.")
NOTE: EX2200-C switches cannot be mounted on all four posts of a rack.
Mounting bracket
Copyright © 2016, Juniper Networks, Inc.