Figure 41: Mounting An Ex2200-C Switch Using Magnet Mount - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide
140
NOTE: You can place the magnet sheet only at the bottom of the
switch.
Mount the magnet along with the switch on the ferrous surface where you want
b.
to mount the switch orienting the front panel downwards as shown in
Figure 41 on page 140.

Figure 41: Mounting an EX2200-C Switch Using Magnet Mount

(Optional) Attach the cable guard to protect cable connections:
3.
Use the 3 truss-head screws to attach the cable guard to the bottom of the chassis.
a.
Use the thumbscrews to tighten or loosen the guard to allow you to insert cables.
b.
See Figure 42 on page 141.
Copyright © 2016, Juniper Networks, Inc.
Magnetic surface
Magnet mount