Mounting An Ex2200 Switch On Or Under A Desk Using Screws; Figure 36: Securing The Ex2200-C Switch Using Security Slots - Juniper EX2200 Hardware Manual

Related
Documentation

Mounting an EX2200 Switch On or Under a Desk Using Screws

Copyright © 2016, Juniper Networks, Inc.

Figure 36: Securing the EX2200-C Switch Using Security Slots

Security slot
Security cable
Connecting AC Power to an EX2200 Switch on page 149
Connecting DC Power to an EX2200 Switch on page 151
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 167
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 170
Wall-Mounting Warnings for EX2200 Switches on page 229
This topic applies only to the EX2200-C switch, the compact, fanless model.
You can mount an EX2200-C switch on or under a desk or other level surface by using
the flexible mounting slots on the bottom of the chassis to secure the switch.
Before mounting the switch on or under a desk or other lever surface:
Verify that the site meets the requirements described in
for EX2200 Switches" on page
Place the desk in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
Read "General Safety Guidelines and Warnings" on page
to "Chassis Lifting Guidelines for EX2200 Switches" on page
Remove the switch from the shipping carton (see
page 113).
NOTE: Do not block the vents on the top of the EX2200-C switches. Doing
this can lead to overheating of the switch chassis.
"Site Preparation Checklist
47.
211, with particular attention
"Unpacking an EX2200 Switch" on
Chapter 11: Installing the Switch
221.
135