Mounting An Ex2200 Switch; Table 47: Ex2200 Switch Mounting Methods - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide
Related
Documentation

Mounting an EX2200 Switch

Table 47: EX2200 Switch Mounting Methods

Mounting Method
Desk or other level surface
(using rubber feet)
Desk or other level surface
(using screws)
Two-post rack or cabinet
Four-post rack or cabinet
Recessed position
118
"Mounting an EX2200 Switch On or Under a Desk Using Screws" on page 135
the desk/wall mounting screws)
"Mounting an EX2200 Switch Using the Magnet Mount" on page 138
separately orderable magnet sheet)
Follow instructions in "Connecting Earth Ground to an EX Series Switch" on page
3.
Follow instructions in "Connecting AC Power to an EX2200 Switch" on page 149
4.
"Connecting DC Power to an EX2200 Switch" on page
Perform initial configuration of the switch by following instructions in
5.
and Configuring an EX Series Switch (CLI Procedure)" on page 167
Configuring an EX Series Switch (J-Web Procedure)" on page
Set the switch's management options by following the appropriate instructions:
6.
Connecting a Switch to a Network for Out-of-Band Management on page 155
Connecting a Switch to a Management Console by Using an RJ-45 Connector on
page 157
Rack Requirements for EX2200 Switches on page 56
Cabinet Requirements for EX2200 Switches on page 57
Clearance Requirements for Airflow and Hardware Maintenance for EX2200 Switches
on page 58
Table 47 on page 118 lists the methods you can use to mount an EX2200 switch.
Switch Model
EX2200
EX2200-C
EX2200-C
EX2200
EX2200-C
EX2200
EX2200-C
EX2200
Comments
On a desk or other level surface by using rubber feet provided with
the switch
On or under a desk or other level surface by using screws
On two posts in a 19-in. rack or cabinet by using the mounting
brackets.
On four posts in a 19-in. rack or cabinet by using the separately
orderable four-post rack-mount kit
On two posts in a 19-in. rack or cabinet by using the two post
rack mounting brackets.
In a position recessed 2 in. from the front of a 19-in. rack or cabinet
by using the 2-in.-recess front brackets in the separately orderable
four-post rack-mount kit. You can mount the switch in this recessed
position on two-post or four-post racks and cabinets
(using the
151.
"Connecting
or "Connecting and
170.
Copyright © 2016, Juniper Networks, Inc.
(using
143.
or