Figure 50: Connecting A Switch To A Network For Out-Of-Band Management - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide
Related
Documentation
156
See "EX2200 Switches Hardware Overview" on page
See EX2300 Switches Hardware Overview.
See Rear Panel of an EX3200 Switch.
See Rear Panel of an EX3300 Switch.
See Rear Panel of an EX3400 Switch.
See Rear Panel of an EX4200 Switch.
See EX4300 Switches Hardware Overview
See Front Panel of an EX4500 Switch.
See EX4550 Switches Hardware Overview
See Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch.
See Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch.
See Routing Engine (RE) Module in an EX8216 Switch.
See Front Panel of an XRE200 External Routing Engine.
See OCX1100 Switches Hardware Overview.
Connect the other end of the Ethernet cable to the management device.
2.
Figure 50: Connecting a Switch to a Network for Out-of-Band
Management
Connecting a Switch to a Management Console by Using an RJ-45 Connector on
page 157
Management Port Connector Pinout Information for an EX2200 Switch on page 108
Pinout Information for the RJ-45 Management Port on an EX2300 Switch
Management Port Connector Pinout Information for an EX3200 Switch
3.
Copyright © 2016, Juniper Networks, Inc.