Table 22: Chassis Viewer For Ex4500 Switches - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide

Table 22: Chassis Viewer for EX4500 Switches

Field
Front View
Interface status
LCD panel
Console port
Management ( ) port
me0
USB port
Rear View of the EX4500 Switch
Fan tray
Virtual Chassis port
Power supplies
Intraconnect module
Virtual Chassis module
38
Description
In the image, the colors listed below denote the interface status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
For a Virtual Chassis configuration, select the switch to view the interface status.
If an SFP+ uplink module is installed in the switch, mouse over the interface (ports) on the
module for more information.
For 1-Gigabit Ethernet and 10-Gigabit Ethernet ports, the interfaces appear dimmed if no
transceiver is inserted. The chassis viewer displays
over the port icon.
LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current character
display.
The console port is used to connect the switch to a management host such as a PC or a laptop.
The management port is used to connect the switch to a management device for out-of-band
management. Use this port for initial switch configuration.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for
your EX Series switch.
Mouse over the fan tray icon to display status of the fans and airflow direction information. For
a Virtual Chassis, the status of the fans of the selected member switch is displayed.
Displayed only when switches are configured as a Virtual Chassis. The colors listed below denote
the VCP status:
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
Mouse over the power supply icons to display name, status, and description information.
Mouse over the module to display details of the intraconnect module. The intraconnect module
helps the switch achieve line rate on all its ports.
Mouse over to display details of the switches in the Virtual Chassis configuration.
when you mouse
Transceiver not plugged-in
Copyright © 2016, Juniper Networks, Inc.