Connecting Ac Power To An Ex2200 Switch - Juniper EX2200 Hardware Manual

Connecting AC Power to an EX2200 Switch

Copyright © 2016, Juniper Networks, Inc.
Connecting AC Power to an EX4500 Switch
Connecting DC Power to an EX4500 Switch
Connecting AC Power to an EX4550 Switch
Connecting DC Power to an EX4550 Switch
Connecting AC Power to an EX6200 Switch
Connecting DC Power to an EX6200 Switch
Connecting AC Power to an EX8200 Switch
Connecting DC Power to an EX8200 Switch
Connecting AC Power to an EX9204 Switch
Connecting DC Power to an EX9204 Switch
Connecting AC Power to an EX9208 Switch
Connecting DC Power to an EX9208 Switch
Connecting AC Power to an EX9214 Switch
Connecting DC Power to an EX9214 Switch
General Safety Guidelines and Warnings on page 211
Grounded Equipment Warning on page 229
The power supply in an EX2200 switch is located on the rear panel.
Ensure that you have the following parts and tools available:
A power cord appropriate for your geographical location
A power cord retainer clip
Ensure that you have connected the switch chassis to earth ground.
CAUTION: To meet safety and electromagnetic interference (EMI)
requirements and to ensure proper operation, you must connect the switches
to earth ground before you connect them to power. For installations that
require a separate grounding conductor to the chassis, use the protective
earthing terminal on the switch chassis to connect to the earth ground. For
instructions on connecting earth ground, see
an EX Series Switch" on page
when you plug the power supply in the switch into a grounded AC power
outlet by using the AC power cord appropriate for your geographical location
(see "AC Power Cord Specifications for EX2200 Switches" on page
Chapter 12: Connecting the Switch to Power
"Connecting Earth Ground to
143. An EX2200 switch gets additional grounding
64).
149