Juniper EX2200 Hardware Manual page 83
Hide thumbs
Also See for EX2200:
- Hardware manual (354 pages) ,
- User manual (238 pages) ,
- Complete hardware manual (176 pages)
Table of Contents
Advertisement
Chapter 6: Preparation Overview
Leave at least 24 in. (61 cm) in front of the switch and 6 in. (15.2 cm) behind the switch.
For service personnel to remove and install hardware components, you must leave
adequate space at the front and back of the switch. NEBS GR-63 recommends that
you allow at least 30 in. (76.2 cm) in front of the rack or cabinet and 24 in. (61 cm)
behind the rack or cabinet.
Related
Rack Requirements for EX2200 Switches on page 56
Documentation
Cabinet Requirements for EX2200 Switches on page 57
General Site Guidelines on page 53
Rack-Mounting and Cabinet-Mounting Warnings on page 224
Cooling System and Airflow in an EX2200 Switch on page 19
Copyright © 2016, Juniper Networks, Inc.
61
Advertisement
Table of Contents
