Registering Products-Mandatory For Validating Slas - Juniper EX2300-C Hardware Manual

Related
Documentation
Registering Products—Mandatory for Validating SLAs
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
NOTE: You must provide mounting screws that are appropriate for your rack
or cabinet to mount the switch on a rack or a cabinet.
Unpacking an EX2300 Switch on page 123
EX2300 Switches Hardware Overview on page 3
Register all new Juniper Networks hardware products and changes to an existing installed
product using the Juniper Networks website to activate your hardware replacement
service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website
and update the installation base data if there is any addition or change to
the installation base or if the installation base is moved. Juniper Networks
will not be held accountable for not meeting the hardware replacement
service-level agreement for products that do not have registered serial
numbers or accurate installation base data.
Register your product(s) at:
Update your install base at:
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
Contacting Customer Support to Obtain Return Material Authorization on page 205
Contacting Customer Support to Obtain a Return Materials Authorization for an NFX250
Device
Chapter 11: Unpacking the Switch
https://tools.juniper.net/svcreg/SRegSerialNum.jsp
.
.
125