Mounting An Ex2200 Switch On A Desk Or Other Level Surface - Juniper EX2200 Hardware Manual

Table 47: EX2200 Switch Mounting Methods (continued)
Mounting Method
Wall mount
Magnet mount
Related
Documentation

Mounting an EX2200 Switch on a Desk or Other Level Surface

Copyright © 2016, Juniper Networks, Inc.
Switch Model
EX2200
EX2200-C
EX2200-C
WARNING:
When mounting an EX2200 switch chassis in a vertical position, orient the
front panel of the chassis downward to ensure proper airflow and meet
safety requirements in the event of a fire.
When wall mounting EX2200-24P and EX2200-48P models, install the
wall-mount baffle above the units to reduce the risk of objects or
substances falling into the air exhaust or power supply, which could cause
a fire.
The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm) apart so that
the switch can be mounted in any rack or cabinet that provides holes spaced at that
distance.
See the Related Documentation for detailed descriptions of the various rack or cabinet
mounting options.
Mounting an EX2200 Switch on Two Posts of a Rack or Cabinet on page 122
Mounting an EX2200 Switch on Four Posts of a Rack or Cabinet on page 124
Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet on page 128
Mounting an EX2200 Switch on a Desk or Other Level Surface on page 119
Mounting an EX2200 Switch on a Wall on page 128
Mounting an EX2200 Switch On or Under a Desk Using Screws on page 135
Mounting an EX2200 Switch Using the Magnet Mount on page 138
Connecting Earth Ground to an EX Series Switch on page 143
You can mount an EX2200 switch on a desk or other level surface by using the four rubber
feet that are shipped with the switch. The rubber feet stabilize the chassis.
Before mounting the switch on a desk or other level surface:
Comments
On a wall by using screws or separately orderable wall-mount
kit
On a wall by using screws
On or under a surface made of ferrous material using the separately
orderable magnet sheet
Chapter 11: Installing the Switch
119