Figure 38: Mounting The Ex2200-C Switch On Or Under A Desk Using Screws - Juniper EX2200 Hardware Manual

Copyright © 2016, Juniper Networks, Inc.
Place the switch on the mounting screws, and slide it forward or backward until it
3.
locks in place. See Figure 38 on page
Figure 38: Mounting the EX2200-C Switch On or Under a Desk Using
Screws
(Optional) Attach the cable guard to protect cable connections:
4.
Use the 3 truss-head screws to attach the cable guard to the bottom of the chassis.
a.
Use the thumbscrews to tighten or loosen the guard to allow you to insert cables.
b.
See Figure 39 on page
137.
138.
Chapter 11: Installing the Switch
137