Network Port Connector Pinout Information For An Nfx350 Device - Juniper NFX350 Hardware Manual

Table 29: RJ-45 Management Port Connector Pinouts for the NFX350 Devices (continued)
Pin
7
8
SEE ALSO
NFX350 Chassis | 24

Network Port Connector Pinout Information for an NFX350 Device

A network port on an NFX350 device uses an RJ-45 connector to connect to a device.
The port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T connection. Two LEDs
on the port indicate link/activity on the port and the port status. See
on page 25.
Table 30 on page 61 provides the pinout information for the RJ-45 connector. An RJ-45 cable, with a
connector attached, is supplied with the switch.
Table 30: Network Port Connector Pinout Information for NFX350 Devices
Pin
1
2
3
4
5
Signal
TRP4+
TRP4–
Signal
TRP1+
TRP1-
TRP2+
TRP3+
TRP3-
Description
Transmit/receive data pair 4
Transmit/receive data pair 4
"LED Details of an NFX350 Device"
Description
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 2
Positive Vport (in PoE models)
Transmit/receive data pair 3
Transmit/receive data pair 3
61