Switching Authority - Siemens siprotec 7SA6 User Manual

Distance protection
Hide thumbs Also See for siprotec 7SA6:
Table of Contents

Advertisement

7.4.6

Switching Authority

From the
Device Front
:
From PC with
®
DIGSI
4
7SA6 Manual
C53000-G1176-C133-1
Switching authority determines the command sources that are permitted for control.
In devices with graphic display the switching authority is determined by the upper key-
operated switch. If the key-operated switch is in horizontal position ( local ), the local
control is admitted via the device panel. If it is in vertical position ( remote ), the remote
control is admitted.
Otherwise use the device control menu: with a device ready for operation, first press
key. The 0$,1 0(18 appears.
the
MENU
key, select the menu item &RQWURO and move to editing the control
Using the
key. The selection &21752/ appears.
functions with the
Here, select the menu item &RQWURO $XWK with the
key. The selection &21752/ $87+ appears (see Figure 7-55).
selection using the
&21752/

!,QWHUORFN
>&RQWURO $XWK –> 4
3: 8QORFN &RQWURO"

Figure 7-55
Setting Switching Authority with the Operator Control Panel
key opens a selection window in which the options /2&$/5(027(
Pressing the
ENTER
are offered.
Choose the desired option using the
Acknowledge the subsequent message pressing the
key to return to the 6:,7&+ $87+ level; the
Use the
0(18.
For safety reasons, switching authority can only be changed locally using the keypad
on the front panel of the device. Switching authority cannot be changed with DIGSI
To perform control with DIGSI
5(027(, or the test conditions for remote control of switching authority must not be set
to active. Switching authority is first transferred to DIGSI
(see Figure 7-49) is opened.

–> 3
&21752/ $87+

6ZLWFK $XWK! /RFDO
Enter password No. 2 (for non-interlocked
ENTER
switching) and acknowledge with
&21752
 !5HPRWH
6ZLWF
and
keys, and confirm with the
®
4, switching authority at the device must be set to
Control During Operation
key and switch to the next
ENTER

/RFDO
/RFDO
ENTER
key.
ENTER
key to return to the 0$,1
MENU
®
4 when the control window
ENTER
key.
®
4.
7-55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents