Siemens siprotec 7SA6 User Manual page 3

Preface
Aim of this Manual
Target Audience
Applicability of this
Manual
Additional support
Courses
Instructions and
Warnings
7SA6 Manual
C53000-G1176-C133-1
This manual describes the functions, operation, mounting, and commissioning of the
device. In particularly, you will find:
• Information regarding configuration of the device → Chapter 5,
• Description of the device functions and setting facilities → Chapter 6,
• Instruction of operation while in service → Chapter 7,
• Instruction for mounting and commissioning → Chapter 8,
• List of the technical data → Chapter 10,
• Summery of the most significant data for the experienced user in the Appendix.
Protection engineers, commissioners, persons who are involved in setting, testing and
maintenance of protection, automation, and control devices, as well as operation per-
sonnel in electrical plants and power stations.
This manual is valid for SIPROTEC
Indication of Conformity
This product complies with the directive of the Council of the European Communities
on the approximation of the laws of the Member States relating to electromagnetic
compatibility (EMC Council Directive 89/336/EEC) and concerning electrical equip-
ment for use within specified voltage limits (Low-voltage directive 73/23 EEC).
Conformity is proved by tests conducted by Siemens AG in accordance with Article 10
of the Council Directive in agreement with the generic standards EN 50081 and EN
50082 (for EMC directive) and the standards EN 60255-6 (for low-voltage directive).
The device is designed in accordance with the international standards of IEC 255 and
the German standards DIN 57 435 part 303 (corresponding to VDE 0435 part 303).
Should further information be desired or should particular problems arise which are
not covered sufficiently for the purchaser's purpose, the matter should be referred to
the local Siemens representative.
Individual course offerings may be found in our Training Catalog, or questions can be
directed to our training center. Please contact your Siemens representative.
The warnings and notes contained in this manual serve for your own safety and for an
appropriate lifetime of the device. Please observe them!
The following terms are used:
®
7SA6; Distance Protection; firmware version 4.0
iii