Siemens siprotec 7SA6 User Manual page 683

Distance Protection (position 10 to 12)
Region-Specific Default/Language Settings and Function Versions
Region GE, language German (language can be changed)
Region world, language English (GB) (language can be changed)
Region US, language English (USA) (language can be changed)
Region world, language German (language cannot be changed)
Region world, 50/60 Hz, IEC/ANSI, language English (GB) (language cannot be changed)
Region US, 60 Hz, ANSI, language English (USA) (language cannot be changed)
Regulations on region-specific presettings and function versions:
Region US and World: Stub bus DT visible by other kind of protection function
Region GE: Stub bus DT not visible by other kind of protection function; no ANSI; no miles
Region US: f = 60 Hz; only ANSI-curves; fault detector preset to miles
Port B: Function and Hardware
None
System port, IEC protocol, electrical RS232
System port, IEC protocol, electrical RS485
System port, IEC protocol, optical 820 nm, ST-connector
System port, Profibus FMS Slave, electrical RS485
System port, Profibus FMS Slave, optical, single-ended ring, ST-connector
System port, Profibus FMS Slave, optical, double-ended ring, ST-connector
Analog Output 2 x 0 to 20 mA
Port C
DIGSI 4, electrical RS232
DIGSI 4, electrical RS485
With Analog Output see addtional information "M"
Port C and Port D
DIGSI 4, electrical RS232 (Port C)
DIGSI 4, electrical RS485 (Port C)
Analog Output 2 x 0 to 20 mA (Port D)
7SA6 Manual
C53000-G1176-C133-1
7SA6
see page A-8
Appendix
5 6 7 8 9 10 11 12 13
_
_
A
B
C
M
N
P
0
1
2
3
4
5
6
7
1
2
9
+ M
1
2
K
14 15 16
A-7