Preset Configurations; A.4 Preset Configurations - Siemens siprotec 7SA6 User Manual

Appendix
A.4

Preset Configurations

Presettings
A-42
The LED indication presettings which are preset in the device when it leaves the
factory are summarised in Table A-1. Please take into consideration that LED8 to
LED14 is not available in 7SA610.
The presettings of the binary inputs are listed (dependent on the ordering variant) in
Tables A-2 to A-4.
The presettings of the binary outputs are listed (dependent on the ordering variant) in
Tables A-5 to A-9. The General Diagrams in Appendix A, A.2 show which binary
outputs can be used as accelerated binary outputs, i. e. suited for a fast command
tripping.
Positions that are not indicated in the following tables have no presetting.
Table A-1 LED indication presettings
LED LCD Text
LED1 Relay PICKUP L1
LED 2 Relay PICKUP L2
LED3 Relay PICKUP L2
LED4 Relay PICKUP L3
LED5 Relay PICKUP E
LED6 EF reverse
Dis. reverse
2
LED7 — )
Relay TRIP 1pL1
Relay TRIP 1pL2
Relay TRIP 1pL3
LED8 Dis.TripZ1/1p
DisTRIP3p. Z1sf
DisTRIP3p. Z1mf
LED9 Dis.TripZ1B1p
DisTRIP3p.Z1Bsf
DisTRIP3p Z1Bmf
LED10 Dis.TripZ2/1p
Dis.TripZ2/3p
LED11 Dis.TripZ3/T3
Dis.TRIP 3p. Z4
Dis.TRIP 3p. Z5
1
) devices with single- and three-pole tripping
2
) devices with three-pole tripping only
3
) devices with automatic reclosure
Function No.
0511 Device (general) trip, latched
0503 Device (general) pick up phase L1,
latched
0504 Device (general) pick up phase L2,
latched
0505 Device (general) pick up phase L3,
latched
0506 Device (general) pick up earth fault,
latched
1359 Device (general) pick up reverse
3720 fault, latched
2
— ) no pre-setting
1
0512 ) Device (general) trip 1-pole,
1 1
0513 ) latched )
1
0514 )
1
3811 ) Distance protection trip in zone Z1,
3823 latched
3824
1
3813 ) Distance protection trip in zone Z1B,
3825 latched
3826
1
3816 ) Distance protection trip in zone Z2,
3817 latched
3818 Distance protection trip in zones Z3
3821 to Z5, latched
3822
Remarks
2
)
7SA6 Manual
C53000-G1176-C133-1