Configuration
5.7
Date and Time Stamping
Time
Synchronization
5-56
Integrated date and time stamping allows an exact evaluation of the sequence of
events (e.g. event logs and trip logs or limit violations). The following clock settings are
available:
• Internal RTC clock (Real Time Clock),
• External synchronization sources (DCF, IRIG B, SyncBox, IEC 60870-5-103),
• External minute impulses via binary input.
Note:
The device is delivered from the factory with the internal RTC clock selected as the
time source, independent of whether the device is equipped with a SCADA interface
or not.
Settings for time synchronization may be found in DIGSI
7LPH V\QFKURQL]DWLRQ (Figure 5-56).
Figure 5-56
Setting Window in DIGSI
To open the 7LPH 6\QFKURQL]DWLRQ
click on 7LPH 6\QFKURQL]DWLRQ. See Figure 5-57.
®
®
4 – example
)RUPDW window, the user should double-
4 under 6HWWLQJV →
7SA6 Manual
C53000-G1176-C133-1