Siemens siprotec 7SA6 User Manual page 736

Appendix
Addr. Setting Title
2913A FFM U<max (3ph)
2914A FFM Idelta (3p)
2921 T mcb
3001 Sens. Earth Flt
3002 3U0>
3003 Uph-e min
3004 Uph-e max
3005 3I0>
3006 T Sens.E/F
3007 T 3U0>
3008A TRIP Direction
3010 CT Err. I1
3011 CT Err. F1
3012 CT Err. I2
3013 CT Err. F2
3101 FCT EarthFltO/C
3102 BLOCK for Dist.
3103 BLOCK 1pDeadTim Earth fault overcur-
3104A Iph-STAB. Slope
3105A 3IoMin Teleprot
3105A 3IoMin Teleprot
3110 Op. mode 3I0>>>
B-12
Function Setting Options
Measurement 2..100 V
Supervision
Measurement 0.05..1.00 A
Supervision
Measurement 0..30 ms
Supervision
Sensitive Earth Alarm Only
Flt.(comp/ isol. ON
starp.) OFF
Sensitive Earth 1..150 V
Flt.(comp/ isol.
starp.)
Sensitive Earth 10..100 V
Flt.(comp/ isol.
starp.)
Sensitive Earth 10..100 V
Flt.(comp/ isol.
starp.)
Sensitive Earth 0.003..1.000 A
Flt.(comp/ isol.
starp.)
Sensitive Earth 0.00..320.00 sec
Flt.(comp/ isol.
starp.)
Sensitive Earth 0.00..320.00 sec
Flt.(comp/ isol.
starp.)
Sensitive Earth Forward
Flt.(comp/ isol. Reverse
starp.) Non-Directional
Sensitive Earth 0.003..1.600 A
Flt.(comp/ isol.
starp.)
0.0..5.0 °
Sensitive Earth
Flt.(comp/ isol.
starp.)
Sensitive Earth 0.003..1.600 A
Flt.(comp/ isol.
starp.)
0.0..5.0 °
Sensitive Earth
Flt.(comp/ isol.
starp.)
Earth fault overcur- ON
rent OFF
Earth fault overcur- with every Pickup
rent with single-phase Pickup
with multi-phase Pickup
NO
YES
rent NO
Earth fault overcur- 0..30 %
rent
Earth fault overcur- 0.01..1.00 A
rent
Earth fault overcur- 0.003..1.000 A
rent
Earth fault overcur- Forward
rent Reverse
Non-Directional
Inactive
Default Setting
5 V Maximum Voltage Threshold U<
(3phase)
0.10 A Delta Current Threshold (3phase)
0 ms T mcb
Alarm Only Sensitive Earth Flt.(comp/ isol. starp.)
50 V 3U0> pickup
40 V Uph-e min of faulted phase
75 V Uph-e max of healthy phases
0.050 A 3I0> Release directional element
1.00 sec Time delay for sens. E/F detection
0.00 sec Time delay for sens. E/F trip
Forward Direction for sens. E/F trip
0.050 A Current I1 for CT Angle Error
0.0 °
CT Angle Error at I1
1.000 A Current I2 for CT Angle Error
0.0 °
CT Angle Error at I2
ON Earth Fault overcurrent function is
with every Pickup Block E/F for Distance protection
NO Block E/F for 1pole Dead time
10 % Stabilisation Slope with Iphase
0.50 A 3Io-Min threshold for Teleprot.
schemes
0.500 A 3Io-Min threshold for Teleprot.
schemes
Inactive Operating mode
Comments